Why pressure washer nozzles tend to wear out
Summary：
High pressure washer nozzles are vital for launching high pressure water jets, but one problem we will find is that the nozzles of high pressure washers are worn out more than they should be. Damaged nozzles cause the high pressure water jet to become dispersed, which affects the effectiveness of the operation. So what are the reasons for the wear and tear of the nozzle of the high-pressure cleaner?
Author:
Source:
Release time:
2023-06-06
High pressure washer nozzles are vital for launching high pressure water jets, but one problem we will find is that the nozzles of high pressure washers are worn out more than they should be. Damaged nozzles cause the high pressure water jet to become dispersed, which affects the effectiveness of the operation. So what are the reasons for the wear and tear of the nozzle of the high-pressure cleaner?
1, high temperature on the nozzle: If the high-pressure nozzle for a long time in the high temperature or abnormal temperature operation, then, there will be nozzles due to material softening and damage to the phenomenon occurs.
2, corrosion of the nozzle harm: when we use chemical materials to spray cleaning objects, these chemical materials usually also lead to high-pressure nozzle materials were corrosive damage, and then cause hidden problems.
3, blocking the nozzle hazard: chemical materials and impurities in the high-pressure nozzle inside or outside the edge of the continuous accumulation will cause the nozzle blockage. This usually affects the spray shape of the nozzle, which in turn will affect the working pressure of the high-pressure cleaner.
4, accidental damage to the nozzle of the hazards: for safety reasons, although the mouth of the high-pressure nozzle is usually designed as a concave, but if we do not use the correct and can not carry out timely maintenance and repair, fan-shaped nozzle offset structure is very easy to suffer damage.
5, erosion on the nozzle of the hazards: high-pressure nozzle erosion occurs mainly by the working pressure of the high-pressure cleaner, the type of chemical materials used, the hardness of the liquid and its flow rate to decide. In addition, the liquid particles in the impurities will also make the nozzle erosion. When high-pressure water jets flow through the nozzle hole in the metal surface, the nozzle hole will produce erosion hazards, usually leading to a reduction in the pressure of the high-pressure cleaner, the spray state becomes irregular.
Other Information
NO CONTENT
Contact Us
No.2880 Kaifai Road,Sanjia Avenue,Taizhou Bay New District,JiaoJiang,Taizhou,Zhejiang,China 318014